Juniper
Exam Name: Juniper Networks Certified Internet Associate (JNCIA-E)
Exam code: JN0-120
http://www.examcertify.co.uk/JN0-120.html
Click the link below to buy full version as Low as $39
One of the most
essential means on how you can prepare for Juniper
Networks Certified Internet Associate (JNCIA-E) exam is by acquiring the
right JN0-120 study materials. This
is essential for the reason that not getting the right study materials will not
surely help you prepare and eventually passing the Juniper Networks Certified Internet Associate (JNCIA-E) certification
exam. Getting wrong study material will just waste your time and money. Some of
the common forms of the JN0-120 PDF study material are pdf, CDs and books as well as other
journals. As there are numerous Juniper
Networks Certified Internet Associate (JNCIA-E) materials available out
there, be sure to acquire the right one that offers you the most recent and
applicable JN0-120 materials. It
would be best if you can get some JN0-120
samples because getting sample will able to help you determine if the Microsoft
materials you have are designed or intended with the certification you wish to
obtain.
|
Question:
1
|
By default, how does the
router handle changes to its operational configuration?
A. Changes are not implemented,
but are saved automatically.
B. Changes are not
implemented and must be written into memory.
C. Changes are implemented
immediately and saved automatically.
D. Changes are implemented
immediately, but must be written into memory.
|
Answer: C
|
|
Question:
2
|
You would like to
configure your PC's IP address of 10.10.0.156 as an FTP host with a username of
user and a password of mypass. Which configuration command accomplishes this
goal?
A. host userpc 10.10.0.156
ftp user mypass
B. host userpc 10.10.0.156
tftp user mypass
C. hostname userpc
10.10.0.156 ftp user mypass
D. hostname userpc
10.10.0.156 tftp user mypass
|
Answer: A
|
|
Question:
3
|
Where should you install
the spare line module in a redundancy group?
A. last slot in the
chassis
B. first slot in the
chassis
C. lowest numbered slot in
the group
D. highest numbered slot
in the group
|
Answer: C
|
|
Question:
4
|
Given the following router
output, which configuration file will the router use at its next reload?
A. config
B. clientqos.cnf
C. startup-config
D. running-configuration
|
Answer: D
|
|
Question:
5
|
What does the SRP
distribute to the line modules when a routing table changes?
A. updated RIB-Out
B. link-state information
C. an incremental update
D. the complete routing
table
|
Answer: D
|
|
Question:
6
|
How are the slot groups
arranged in the ERX 700 Series Edge Router?
A. Group 1 - Slots 0
&1
Group 2 - Slot 2
Group 3 - Slot 3
Group 4 - Slot 4
B. Group 1 - Slots 2 &
3
Group 2 - Slot 4
Group 3 - Slot 5
Group 4 - Slot 6
C. Group 1 - Slot 2
Group 2 - Slot 3
Group 3 - Slot 4
Group 4 - Slot 5 & 6
D. Group 1 - Slot 3
Group 2 - Slot 4
Group 3 - Slot 5
Group 4 - Slots 6 & 7
|
Answer: B
|
|
Question:
7
|
Which protocol is used to
transfer files to on the ERX Edge Router? (Choose two.)
A. SCP
B. FTP
C. RCP
D. TFTP
|
Answer: B,D
|
|
Question:
8
|
You would like to install
an OC-48c line module in an ERX 1440 Edge Router. Which slots can support this
configuration?
A. 0 and 1
B. 1 and 2
C. 2 and 3
D. 3 and 4
|
Answer: C
|
|
Question:
9
|
What are two ways that IP
datagrams are passed from the ingress line module to the egress line module?
(Choose two.)
A. over an ATM PVC
B. over a FastEthernet bus
C. over a Gigabit Ethernet
bus
D. over high speed serial
bus
|
Answer: A,D
|
|
Question:
10
|
Which service does the ERX
Edge Router support with a virtual router?
A. voice over IP
B. wholesale services
C. IP quality of service
D. SNMP management
|
Answer: B
|
No comments:
Post a Comment