IBM
Exam Name: Virtualization Technical Support for AIX and Linux V2
000-109 PDF
http://www.examcertify.co.uk/000-109.html
Click the link below to buy full version as Low as $39
One of the most
essential means on how you can prepare for VIRTUALIZATION
TECHNICAL SUPPORT FOR AIX AND LINUX V2 exam is by acquiring the right 000-109 study materials. This is
essential for the reason that not getting the right study materials will not
surely help you prepare and eventually passing the VIRTUALIZATION TECHNICAL SUPPORT FOR AIX AND LINUX V2 certification
exam. Getting wrong study material will just waste your time and money. Some of
the common forms of the 000-109 PDF
study material are pdf, CDs and books as well as other journals. As there are
numerous VIRTUALIZATION TECHNICAL
SUPPORT FOR AIX AND LINUX V2 materials available out there, be sure to
acquire the right one that offers you the most recent and applicable 000-109 materials. It would be best if
you can get some 000-109 samples
because getting sample will able to help you determine if the Microsoft
materials you have are designed or intended with the certification you wish to
obtain.
Question:
1
|
An administrator is attempting to configure a new
deployment of 56 POWER7 Blades across 4 IBM BladeCenter H chassis. Each blade
will be installed with an IVM and 2 LPARs.IVM is installed and the
administrator checks that both LHEA ports are reporting a Link State of
"Up." 2 LPARs are created and the network traffic balanced by
allocating one LHEA port to the first LPAR, the second port to the other. After
successfully installing the first LPAR via NIM, the administrator finds the
second LPAR fails to netboot. What should the administrator verify on the
BladeCenter Chassis?
A. That 4 power supplies (PSU) have been installed.
B. That both the external LHEA ports have been cabled.
C. That a secondary I/O module has been installed and
cabled.
D. That the Multi-Core Scaling (MCS) attribute is
correctly set on both LHEA ports.
Answer: C
|
Question:
2
|
An administrator has a requirement to back up a VIO
server (VIOS) so that it can be rebuilt in the event of a disaster. Which set
of actions will achieve this requirement?
A. Backup all non rootvg volume groups using savevg.
Backup all Storage Pool Information. Run a mksysb of the system.
B. Save "Upgrade Data" on the HMC. Backup
all non rootvg volume groups using savevg. Run a mksysb of the VIOS with the -U
flag.
C. Backup non rootvg structures using savevgstruct.
Capture virtual mappings to a file using viosbr. Run a backupios
D. Capture the virtual network tuning to a file using
the optimizenet command. Capture all virtual device attributes to a file using
the lsattr command. Run a backupios.
Answer: C
|
Question:
3
|
An administrator must remove any installed efixes
before attempting to install a new VIO Fix Pack. Which VIO command will advise
if any VIO efixes are actually present?
A. lslpp
B. emgr
C. lssw
D. oem_platform_level
Answer: C
|
Question:
4
|
Requirements for a disaster recovery site are being
collected. When considering restoring a VIO Server mksysb to disaster recovery
hardware, what is required to ensure automatic virtual device recreation?
A. LPAR profiles must be accurately recreated on the
foreign machine
B. Backups of both mksysb and user-defined structures
are required from the VIO Server
C. The foreign machine must be of the same model and
type
D. Configuration of the existing HMC needs to be
preserved
Answer: A
|
Question:
5
|
When attempting to install a VIO client using NIM, an
adminstrator finds that no disks are available for installation. The disks are
provided by NPIV through the virtual Fibre Channel adapter as described here:
Which of the following explains why is the
administrator unable to see the disks?
A. The virtual fibre channel device has not been
assigned to the client.
B. The HBA on the VIO server is not connected to the
SAN.
C. The fibre device drivers are missing from the SPOT.
D. The LUNs have been incorrectly zoned.
Answer: D
|
Question:
6
|
Which of the following is required to support AME?
A. AIX LPARs
B. Virtual I/O Server
C. A maximum of 4GB of RAM per LPAR
D. On-demand memory feature enabled
Answer: A
|
Question:
7
|
What tool can an architect use to determine which is
the smallest POWER7 server that will provide equal or better overall
performance than a POWER5 570?
A. Facts and Features Guide
B. LPAR Validation Tool
C. Configurator for eBusiness
D. Server Magic
E. Company
Answer: A
|
Question:
8
|
A Power 720 is being used to build 2 environments:
Test and Production, with 2 LPARs in each environment. Processor resources must
be separated between the Test and Production environments to reduce possible
contention, while still being able to share processor resources inside each own
environment. What are the two features required, as a minimum, to accomplish
this? (Select 2)
A. IVM
B. HMC
C. PowerVM Express
D. PowerVM Standard
E. IVE
F. IBM Systems Director
Answer: B,D
|
Question:
9
|
An administrator has the following configuration on a
VIO Server:
Why is this error being displayed?
A. ent3 is configured as 'standard' instead of
'802.3ad'
B. ent3 is a LHEA port and requires the -L flag
C. ent3 has no interface connected
D. ent3 is controlled by the SEA
Answer: D
|
Question:
10
|
The wlmstat -@ 2 command has been run from a global
environment with the following results:
What action can an administrator take to set limits,
so that both server1 and server2 use the same amount of CPU resources?
A. Use the cpu_deallocate -P command to reduce the CPU
resources on server2
B. Use the chsysres command to assign the same CPU
attributes to both servers.
C. Use the chwpar -R command to set the CPU attributes
for each server.
D. Use the syncwpar -E command to copy the CPU
resource allocation from server1 to server2.
Answer: C
|
Question:
11
|
A Linux LPAR is configured using 802.1Q.
The virtual Ethernet device is configured as an 802.1Q
compatible adapter and has VLAN ID 5 configured in the 802.1Q additional VLAN
field.
The administrator runs the following commands on the
Linux LPAR shell without errors:
vconfig add eth0 5ifconfig eth0 10.0.0.2 netmask
255.255.255.0 When the administrator tries to ping 10.0.0.1, the request times
out. What is the problem?
A. The VLAN ID should be in the VLAN-ID field in the
virtual Network device configuration.
B. The administrator is using the incorrect Ethernet
device.
C. The 8021q module is not loaded.
D. The 802.1Q interfaces are not supported on Linux on
Power Systems servers.
Answer: A
|
Question:
12
|
What will cause a broadcast storm when configuring
redundant VIO servers with SEA failover?
A. The secondary SEA is brought online before the
configured primary SEA.
B. A mismatch of defined VLANs between the primary and
secondary SEA.
C. The secondary SEA is created before enabling
failover on the primary SEA.
D. Incorrect EtherChannel configuration on one SEA
Answer: C
|
No comments:
Post a Comment