Microsof
Exam Name: Configuring Windows 8
70-687 PDF
http://www.examcertify.co.uk/70-687.html
Click the link below to buy full version as Low as $39
One of the most
essential means on how you can prepare for CONFIGURING
WINDOWS 8 exam is by acquiring the right 70-687 study materials. This is essential for the reason that not
getting the right study materials will not surely help you prepare and
eventually passing the CONFIGURING
WINDOWS 8 certification exam. Getting wrong study material will just waste
your time and money. Some of the common forms of the 70-687 PDF
study material are pdf, CDs and books as well as other journals. As there are
numerous CONFIGURING WINDOWS 8 materials
available out there, be sure to acquire the right one that offers you the most
recent and applicable 70-687 materials.
It would be best if you can get some 70-687
samples because getting sample will able to help you determine if the Microsoft
materials you have are designed or intended with the certification you wish to
obtain.
|
Question:
1
|
A company has 100 client
computers that run Windows 8. You need to assign static IPv6 addresses to the
client computers. Which Windows Powershell cmdlet should you run?
A. Set-NetTCPSetting
B. Set-NetIPInterface
C. Set-NetlPv6Protocol
D. set-NetIPAddress
|
Answer: D
|
Explanation:
Modifies IP address
configuration properties of an existing IP address
|
Question:
2
|
A company has an Active
Directory Domain Services (AD DS) domain. All client computers run Windows 8.
Portable client computers no longer connect to the corporate wireless network.
You need to ensure that when the corporate wireless network is available, the
computers always connect to it automatically. Which two actions would achieve
the goal? (Each correct answer presents a complete solution.
Choose two.)
A. Create a Group Policy
object (GPO) to configure a wireless network policy. Link the GPO to the
organizational unit that contains the computers.
B. Configure the corporate
wireless network as an unmetered network.
C. Configure the corporate
wireless network as a preferred network.
D. Manually connect to the
corporate wireless network and select the option to connect automatically to that
network.
|
Answer: C,D
|
|
Question:
3
|
A company has client
computers that run Windows 8. The corporate network is configured for tPv4 and
IPv6. You need to disable Media Sensing for IPv6 on the client computers
without affecting IPv4 communications. What should you do on each client
computer?
A. Run the
Disable-NetAdapterBinding Windows PowerShell cmdlet.
B. Run the
Disable-NetAdapter Windows PowerShell cmdlet.
C. Run the
Set-NetlPv6Protocol Windows PowerShell cmdlet.
D. Run the Set-NetlPv4Protocol
Windows PowerShell cmdlet.
|
Answer: C
|
Explanation:
http://technet.microsoft.com/en-us/library/hh826144.aspx
Set-NetIPv6Protocol
[-DhcpMediaSense<DhcpMediaSense>]
Modifies the
DHCPMediaSense property. This parameter value provides a mechanism for the
network adapter to notify the protocol stack of media connect and disconnect
events. These events trigger the DHCP client to take some action, such as
attempting to renew a DHCP lease or removing routes related to a disconnected
network. One application of Media Sense enables the network parameters on the
notebook computer of a roaming user to automatically and ransparently update
without rebooting when the user moves from one location to another.
The acceptable values for
this parameter are:
Enabled: DhcpMediaSense
set to Enabled.
Disabled: DhcpMediaSense
is set to Disabled.
The default value is
Enabled
|
Question:
4
|
DRAG DROP
A company has an Active
Directory Domain Services (AD DS) domain. All client computers run Windows 8.
Two computers named COMPUTER1 and COMPUTER2 are connected to one network switch
and joined to the domain. Windows Firewall is turned off on both computers.
You are planning a remote
management solution. You have the following requirements:
Ensure that COMPUTER2 can
run remote commands on COMPUTER1.
Test the solution by
successfully running a command from COMPUTER2 that executes on COMPUTER1.
You need to select the
commands to run on COMPUTER1 and COMPUTER2 to meet the remote management
requirements.
Which commands should you
run? (To answer, drag the appropriate command or commands to the correct
location or locations in the answer area. Commands may be used once, more than
once, or not at all. You may need to drag the split bar between panes or scroll
to view content.)
|
Answer:
|
|
Question:
5
|
A company has 100 client
computers that run Windows 8. The client computers are members of a workgroup.
A custom application requires a Windows Firewall exception on each client
computer. You need to configure the exception on the client computers without
affecting existing firewall settings. Which Windows PowerShell cmdlet should
you run on each client computer?
A. New-NetFirewallRule
B. Set-NetFirewallSetting
C. Set-NetFirewallRule
D. Set-NetFirewallProfile
E.
New-NetIPSecMainModeRule
|
Answer: A
|
Explanation:
Creates a new inbound or
outbound firewall rule and adds the rule to the target computer.
http://technet.microsoft.com/en-us/library/jj554908.aspx
New-NetFirewallRule -DisplayName
“Allow Inbound Telnet” -Direction Inbound
-Program%SystemRoot%\System32\tlntsvr.exe -RemoteAddress LocalSubnet -Action
Allow
|
Question:
6
|
A company has an Active
Directory Domain Services (AD DS) domain. All client computers run Windows 8. Portable
client computers connect to the corporate wireless network. You have the
following requirements:
Prevent users from
configuring a wireless network by using settings from a USB flash drive.
Do not affect the use of
other USB devices.
You need to create a Group
Policy object (GPO) to meet the requirements.
Which GPO should you
create?
A. A GPO that disables the
Allow only USB root hub connected Enhanced Storage Features policy setting.
B. A GPO that enables
wireless policy processing.
C. A GPO that prohibits
connections to mobile broadband networks when roaming.
D. A GPO that configures
Windows Connect Now settings.
|
Answer: D
|
Explanation:
http://windows.microsoft.com/en-US/windows-vista/What-is-Windows-Connect-Now
Computer Configuration\Policies\Administrative
Templates\Network\Windows Connect Now Turn Off Ability To Configure Using A USB
Flash Drive setting:
Prevents Windows from
being able to store a Windows Connect Now configuration to a UFD.
Because the Windows
Connect Now information stored on a UFD contains information that can allow
computers to access your protected wireless network, you might choose to
disable this setting to improve the security of your wireless networks.
http://sourcedaddy.com/windows-7/windows-connect-now-in-windows-7.html
|
Question:
7
|
A company has client
computers that run Windows 8.
The client computers are
connected to a corporate private network.
Users are currently unable
to connect from their home computers to their work computers by using Remote
Desktop.
You need to ensure that
users can remotely connect to their office computers by using Remote Desktop.
Users must not be able to access any other corporate network resource from
their home computers.
Which setting should you
configure on the home computers?
A. Virtual Private Network
connection
B. Remote Desktop local
resources
C. DirectAccess connection
D. Remote Desktop Gateway
IP address
|
Answer: A
|
Explanation:
DirectAccess is for
Windows Server 2008/2012/Win 7 Ultimate/Enterprise/Win 8 Enterprise only RD
Gateway setup is only for servers Create VPN through manage networks. File
--> Allow incoming connections. Connect through internet and create VPN
which will allow one computer at a time to view the hosts resources, and only
the hosts resources unlike standard VPNs.
|
Question:
8
|
A company has an Active
Directory Domain Services (AD DS) domain. All client computers run Windows 8.
Client computers use Window BitLocker Drive Encryption with a Trusted Platform
Module (TPM) chip. You need to create a Group Policy object (GPO) that will
secure the TPM owner information. Which policy setting should you configure?
A. Enable the Turn on TPM
backup to Active Directory Domain Services policy setting.
B. Enable the Configure
the level of TPM usage authorization information available to the registry
policy setting.
C. Set the Configure the
level of TPM owner authorization information available to operating system
policy setting to Full.
D. Enable the Configure TPM
platform validation profile policy setting.
|
Answer: A
|
Explanation:
http://technet.microsoft.com/en-us/library/jj679889.aspx
|
Question:
9
|
A company has client
computers that run Windows 8. The company uses Windows BitLocker Drive Encryption
with the data-only option o all client computers.
You delete a file
containing highly confidential information from your computer. You need to
clear the free space on the hard drive to minimize the chance of the
confidential information being recovered. Which command should you run on the
client computer?
A. manage-bde –w
B. chkdsk/spotfix
C. diskpart clean
D. BdeHdCfg -target c:
shrink
|
Answer: A
|
Explanation:
http://technet.microsoft.com/en-us/library/jj647761.aspx
Manage-bde –WipeFreeSpace|-w
[<Drive>] [-Cancel] [-computername <Name>] [{-?|/?}] [{-help|-h}]
manage-bde -w C:
Wipes the free space on
the volume removing any data fragments that may have existed in the space.
|
Question:
10
|
You deploy several tablet
PCs that run Windows 8. You need to minimize power usage when the user presses
the sleep button. What should you do?
A. Configure the active
power plan to disable Wake Timers.
B. Configure the active
power plan to use Fast Startup.
C. In Power Options,
configure the sleep button setting to Hibernate.
D. In Power Options,
configure the sleep button setting to Sleep.
|
Answer: C
|
No comments:
Post a Comment